More than just machines: Using OEE basics to improve warehouse packing operations
February 18, 2020
An Out-of-the-Box Application of OEE
OEE, or Overall Equipment Effectiveness is a very common key process indicator used in manufacturing to measure the production efficiency for a machine, line, or cell. The typical application of OEE is a manufacturing environment where operators interact with equipment to produce a product. Modern-day manufacturing environments have grown in complexity, resulting in diversified operations containing many different types of equipment producing very different products. OEE provides management with a high-level indicator to understand how well different processes are performing relative to each other. OEE takes into account individual schedules, performance expectations, and quality requirements. An OEE scorecard helps management to make informed decisions about where to place technical resources to have the greatest impact on the bottom line.
Before getting too deep into the topic at hand, we'll cover the basics behind OEE. While this is not intended to be an exhaustive treatment of the subject, we should get a few semantics out of the way before jumping in.
The value in OEE is understanding the sources of loss.
Manufacturing’s target is to produce as many good parts in the shortest amount of time, with as little idle time as possible. One traditional calculation for OEE is:
OEE= (Good Count x Ideal Cycle Time) / Planned Production Time
This is a very straight forward calculation but fails to show the key components that go into OEE. The value in OEE is understanding the sources of loss, which top manufacturers define in three categories: process downtime “Availability”, process rate loss “Performance”, and scrap “Quality”.
It is studying these indicators where we find the value of OEE. So an alternate calculation, which we will use here is:
OEE = Availability x Performance x Quality.
Since these key factors are percentages, the impact can be significant. For example, running at 100% Availability and 95% of your Performance target would be a great day. But if you are having high scrap or quality issues, say 70%, then the overall OEE would be only 67%. And since most would consider a good OEE to be 85% or higher, you can see why it is important to focus on the three types of losses.
Next, we will take a quick look at the individual calculations for Availability, Performance, and Quality.
Availability is a measure of the time a piece of equipment runs compared to the planned runtime. In layman’s terms, if I have an 8-hour shift and have planned downtime for start-up meetings, breaks, and lunches totaling 2 hours, the total planned runtime is 6 hours. If I run only 3 hours in that 6 hour planned time due to unplanned downtime, then the Availability is 50%.
Performance is a measure of how well a process runs when it is running. In other words, ‘does the process produce parts at the predefined maximum rate?’ Continuing with the example previously used, if the production rate is 100 pieces per hour, and the equipment produced 210 pieces in the 3 hours of runtime, then the Performance is 70%.
Finally, let’s take a look at Quality. Simply put, Quality is the number of good parts produced divided by the total number of parts produced. That’s pretty straight forward. Again, going back to our current example. If the process produces 200 good parts and 10 bad parts, the Quality score is 95%.
OEE = Availability x Performance x Quality
= 50% x 70% x 95%
With these three numbers, we get an overall OEE of 33%.
Applying OEE to a Manual Process
So how is applying OEE to a highly manual process different? How do you use OEE to monitor and improve a process that doesn’t have equipment? In a manual process, the calculations are done in the same way; the fundamentals remain the same. When you properly assign the different types of losses in a manual process, you gain significant insight on how to improve.
Performance is straight forward: even in a manual process, there are expected rates to accomplish the work. We recently optimized a repackaging process for a client where we analyzed the processes and set rates based on the type of part being repackaged. For example, a small part could be packaged at a rate of 100 pieces per hour, and a large part could be packaged at 35 pieces per hour. These rates include the entire packaging process, including palletizing and building boxes. Any reductions in actual rates seen day to day were included in the OEE calculation as Performance loss.
Quality is also straight forward: Were any mistakes made in the packaging process? Did the team members damage the parts, poorly package the parts, or package the parts in the wrong materials? If they have to repack, then the quality number is impacted.
The big change comes with the application of Availability. Recall that Availability compares how much time a machine runs compared to how much it is planned to run. In the case of a highly manual process, the “machine” is the team member. Team members also have “downtime.” They break down (e.g., get sick), need to be serviced (e.g., breaks and lunch), and require maintenance (e.g., vacation)!
In a process that requires multiple setups (e.g. different packaging for different parts) and is heavily influenced by the availability of inputs (e.g. parts to pack, packaging materials, labels), having deeper insight into each of these key metrics gives management information about why the output of the process is what it is and how to improve the output.
Applying OEE in a new way brought fresh insights to a manual process.
The Design and Measurement Phases
In the packaging project mentioned above, the first thought by client leadership was those team members needed to pack faster (i.e. improve Performance). But was that the case? After establishing packaging standards and processes and training the team members, we actually discovered that some team members were really good at packing certain parts and not so good at others. We even found that for some parts the rate was actually much higher in reality than what was originally assumed. Understanding different factors allowed us to establish better benchmarks.
Using the production tracking tool, Production Net, we were able to set up a process for team members in the warehouse to document their work, including any downtime or wait time. One team member was also responsible for collecting the results on an hourly basis. This was done via a small tablet set up with access to the Production Net website.
Quality never showed up as an issue. Once packaging standards were in place and training was completed, the team made very few mistakes. When mistakes were made, we could easily show the impact through our tools.
The Analysis Phase
The real culprit turned out to be Availability. Team members were fast enough at packing, but often didn’t have anything to do - they were waiting on parts to pack and waiting on the right packaging materials to be pulled from warehouse storage. This became the focus. We were able to show with data that by changing the staging process for parts and packaging materials, we could greatly increase the total output without asking the team members to pack faster and risk quality issues. We also were able to show with data that an engaged floor coordinator could watch the packaging process closely and time manpower moves to get the best results. All of this was achieved without asking the team members to pack faster.
The Improvement and Control Phases
With this data, warehouse leadership could estimate the actual labor needs for the warehouse, given the expected quantity and types of parts that were planned for packing. Leaders should plan and shift resources to address different sources of loss.
Coaching warehouse leaders on how to best manage their processes requires a data-based approach. A positive byproduct of clear and accessible is improved reporting to client management and their customer. Overall, OEE was down, but the reason was not the team members’ Performance or Quality. It was the Availability, which in this case meant that they did not have the proper inputs for the process. Using a dynamic interface like ProductionNet allowed us to show them not only a Pareto of the reasons for the poor Availability but also the impact in terms of losses.
Providing performance data to the team members doing the packing created some healthy competition. We put the performance numbers on a TV in the packaging area so the team members could see how they were doing. They weren’t rated negatively on things outside their control (e.g. waiting on inputs), but could see who was the best at certain parts and ask “Why?” leading to an improved understanding of the process across the team.
When we started measuring the process in this way, we saw packing Output increase by 45% and packing Performance also improved over 5 weeks by 16%. Shipping output also improved by more than 70%. We saw the backlog of parts drop by over 65%. On-time shipping performance increased from 10% to over 60%. Additionally, Availability improved by 19%. All these improvements were made with no change to the manpower and no significant changes to the process.
Additionally, this data made it clear to the leadership across the organization where the bottleneck existed: the supply of parts to the warehouse for packing.
While this is a different way of using OEE, the insights gained provided the data needed by leadership to make smart decisions to better manage a highly manual, highly variable process.
This application of OEE also speaks in a common language used by many manufacturing plants to understanding how well their manufacturing processes are running.
Seraph's team of operational managers and senior consultants intercede on our client's' behalf to fix a crisis that is putting the business at immediate risk, turnaround a situation that is damaging the bottom line or restructuring to improve the balance sheet. Seraph has successfully delivered projects in the following regions: The Americas, Europe, China, and India. Seraph's Industry Expertise Includes Aerospace, Automotive, Energy Infrastructure, Healthcare, and Medical Devices. Through our other operating companies, we are continually looking for distressed situations where we can put our expertise and capital to work to create value.
Written By Jay Butler, a Senior Consultant at Seraph.